Click to enlarge

Viking Hot-Line Vandal Resistant Phone

Economical and Vandal Resistant Hot-Line Phone

The K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls.

The K-1900-7 housing consists of a heavy gauge stainless steel panel, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-7 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

For outdoor or harsh environments, the K-1900-7-EWP is available with Enhanced Weather Protection (EWP). The EWP version includes faceplate, transmitter and receiver gaskets, hand soldered silicon sealed connections, gel-filled butt connectors, as well as a urethane potted circuit board with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming

Applications
Catalog sales
Kiosks
Courtesy and customer service phones
Automated tellers (ATMs)
Hot-line
reservation phones
Security and emergency phones
Replaces leased ringdown circuits
Gate/entrance communication in noisy locations (diesel trucks, factory noise, etc.)

Features
Auto dials 1 (up to 32 digits) programmable speed dial number
Touch Tone or pulse dialing
Non-volatile memory (no batteries required)
Operates on analog PABX and key system extensions or analog Centrex and C.O. lines
Programmable 6 digit security code
Touch Tone programmable
Vandal resistant features: 1/8in thick stainless steel panel, armored cable and metal cradle
Programmable pre-dial pause
Blocks fraudulent calls from hand held pocket dialers
Hearing aid compatible amplified handset with sealed push button volume control
Optional Enhanced Weather Protection (EWP)

Specifications
Power: Telephone line powered (20V DC/18mA minimum)
Dimensions: Overall - 127mm x 254mm x 102mm (5in x 10in x 4in)
Operating Temperature: 0C to 32C (32F to 90F)
Humidity: Standard - 5% to 95% non-condensing EWP - Up to 100% condensing
Panel Material: .125 inch thick stainless steel
Handset Cable Length: Standard K-1900-7 - 86cm (34in) K-1900-7-EWP - 137cm (54in)
Mounting: Flush mount or surface mount with optional VE-5x10
Dial Speed: Touch Tone - Normal = 120ms on/off, Fast = 50ms on/off; Pulse - Normal = 10 pps, Fast = 20 pps
Connections: (2) gel-filled butt connectors